01
We draw the sample ourselves
Our technician takes it on site, seals it and logs it. A treatment designed on somebody else’s sample is a guess, and a guess is what you are already paying for.
Nigeria · Oil, gas & industrial · Doc NX‑OV‑001 rev 04
Anyone can ship a drum. We ship the number that proves it worked.
Nexora Energy & Industrial Limited supplies oilfield and industrial chemicals, laboratory and analytical services, procurement, field services and technical support to the oil & gas and wider industrial sectors. Chemistry is selected in the laboratory, proven in the field, and reported against a method.
Certificate of analysis · specimen
Parameter / method
Result
Status
Emulsion resolved, 60 minBottle test · ASTM D1401
0%
Conforms
Water contentASTM D6304 · spec ≤ 500
0ppm
Conforms
Corrosion rateCoupon study · spec ≤ 2.0
0mpy
Conforms
Pour point, treatedASTM D97
0°C
Conforms
H₂S in vapourIP 570
0ppm
Conforms
Total sedimentISO 10307‑2
0%m/m
Conforms
Sample NX‑4471
Batch released
0
Integrated service lines, one point of contact
0
Production chemical families supplied
0h
Standard laboratory turnaround target
0%
Batches released against a certificate
A chemical is a claim until somebody measures it.
Most suppliers sell a product and leave the outcome to you. We take the sample, run the screen, support the injection and evaluate the result — so what you buy is a measured change in your operation, not a pallet in your yard. We are not just a supplier. We aim to be your technical partner.
Plate 01 The screen that comes before the recommendation
“Successful partnerships are built on technical competence, quality, integrity, responsiveness and measurable results.”
Operating principle · Nexora Energy & Industrial Limited
Integrated energy and industrial solutions.
Seven service lines that combine technical expertise, quality products, laboratory capability and field support — so a problem does not have to be handed between vendors to get solved.
01
Oilfield Chemical Solutions
Specialty chemicals and treatment programmes for production and processing challenges, selected by laboratory evaluation.
02
Laboratory & Analytical Services
Crude characterisation, bottle testing, demulsifier screening, compatibility and quality verification.
03
Oil & Gas Procurement & Supply
Chemicals, reagents, laboratory and oilfield equipment, PPE and operational materials through our supplier and OEM network.
04
Technical & Production Chemical Services
Treatment programme development, chemical selection, injection monitoring and production troubleshooting.
05
Field Services & Chemical Trials
Field sampling, chemical trials, performance monitoring and post‑trial evaluation on live systems.
06
Environmental & Water Treatment
Produced and industrial water analysis, wastewater testing, environmental sampling and treatment chemical supply.
07
Industrial Chemical Solutions
Specialty and process chemicals for manufacturing, processing, water treatment and maintenance.
Four stages, in this order, every time.
The order matters: each stage produces the evidence the next one is judged against. Our field work exists to close the gap between what the laboratory predicted and what the system actually did.
02
Bottle tests decide, not the catalogue
Candidate chemistries run side by side against your fluid at your temperature. The one that performs at the lowest effective dose gets recommended — whether or not it is the one we would rather sell.
03
Field trial before full deployment
We support the injection, watch the system and collect the data. Laboratory performance and field performance are not the same thing, and the difference is where money is lost.
04
Evaluate, then optimise
You receive the result, the method and the interpretation — including the runs that underperformed. Then we adjust the dose, the chemistry or the injection point and measure again.
Ten families, each qualified by a test.
We do not recommend from a datasheet. Every family below is matched to your fluid by the laboratory test named in the final column, and re‑checked once it is in the system.
| Code | Family | Primary application | Qualified by |
|---|---|---|---|
| NX‑DE | Demulsifier | Crude and water separation at the separator train | Bottle test |
| NX‑CI | Corrosion inhibitor | Wet gas lines and carbon steel pipework | Coupon study |
| NX‑SI | Scale inhibitor | Downhole squeeze and continuous injection | Inhibition efficiency |
| NX‑WX | Wax & paraffin inhibitor | Flowlines, risers and export systems | Cold finger |
| NX‑PP | Pour point depressant | Waxy crude transport and cold restart | Pour point, D97 |
| NX‑BC | Biocide | Water injection and produced water systems | Bacterial count |
| NX‑DF | Defoamer | Separators, amine units and glycol circuits | Foam knockdown |
| NX‑HS | H₂S scavenger | Sour crude and vapour space control | H₂S in vapour |
| NX‑SF | Surfactant | Wetting, cleaning and interfacial control | Interfacial tension |
| NX‑PC | Other production chemicals | Specified against the operating condition | Programme dependent |
Plate 02 Bulk storage and transfer, where the specification has to hold
Plate 03 Segregated storage and controlled stock handling
Next step
Send us the fluid and the constraint.
Tell us what the system is doing and what it needs to do. We will tell you which test answers the question, what it will take, and what we would recommend once we have the result.
